Met goal for another week. Was in town 3 full days so goal was 9 hours. Actually worked 11.8 hours. Also did some work or research every day. The main accomplishment for the week was finalizing and placing the Garmin Avionics order (received a third of it this week and will get another third of it next week and should get the final parts by early January). I also placed an order for a lot of the tooling and supplies I will need for the avionics.
Marked the wingtip boards to match the wingtip pocket and started filing the PCBs using a Perma-Grit coarse file that arrived a few days ago. Slow, but it will work. Will work on it again in the mornings so I can file outside when it is cooler.
Marked and cut the VA-172 wingtip lens into two pieces using a Dremel SawMax and CM500 blade. I need to cut them to size while it is still warm. It looks like they will fit nicely.